Swivel Stand
The Swivel Stand is designed so that you can take doors and spray, brush or roll them flat then stack them flat to dry or set them on stationary or mobile EdgeRAK™ or FlatRAK™. This is accomplished by attaching RAK-brackets to each door and the Swivel-Pins to the RAK-brackets, then set the door on the Swivel Stand, pin to the flat position and spray, brush, or roll. By pulling the locating pin the door can be swiveled to the opposite side and pinned in place for the same spray, brush or roll process. Once the door is sprayed on both sides you remove the position pin and pickup the door by the RAK-brackets, (they act as handles). You can now stack the doors on the floor or place them on a FlatRAK™ or EdgeRAK™. Once the newly finished door is set down to dry remove the Swivel-Pins from the RAK-brackets and repeat this process on the other doors.
Click on Thumbnail Images to Enlarge
|
|
|
|
|
|
 |
 |
HRSS - Horizontal RAK Swivel Stand (allows doors to be sprayed flat)(requires RAK-brackets on each door)
 |
 |
 |
|
 |
 |
DORRAK
Phone: 508-378-3050
Click Here
to Email us